Musical Fidelity KW mm/mc phono stage.
Build like a tank!!
For the real hi end vinyl lovers!!
In very good condition with original packaging and user guide.
One of the best phono stages, available out there.
SPECS:-
Output : Voltage RMS, maximum > 43 Volts.
Impedance 32 Ohms.
Frequency response deviation from RIAA 20Hz to 20kHz ±0.1dB.
Input : Total harmonic distortion + noise, < 0.012% (MM, 10 Volts output) 20Hz to 20kHz
Input sensitivity for 300mV RMS output 2.9mV Moving Magnet, 500µV Moving Coil Input impedance MC
Switched, 10 Ohms or 100 Ohms in parallel with 470pF MM
All switches up : 68k Ohms in parallel with 47pF, Switch no. 1 down : 47k Ohms + 47pF.
Switch no. 2 down : extra 50pF added.
Switch no. 3 down : extra 100pF added.
Switch no. 4 down : extra 200pF added.
Overload margin 42dB above rated input at 1kHz (MM).
Channel separation > 64dB 20Hz to 20kHz.
Channel balance error < 0.5dB typical.
Signal / noise ref. 1Volt RMS output > 78dB.
Moving Magnet (“A”-weighted) > 75dB.
Moving Coil (“A”-weighted).
Input sockets : 2 phono Moving Magnet via RCA connector – 2 phono Moving Coil via RCA connector.
Output sockets : 2 RCA connectors for line level output.
Dimensions : 483mm – wide. 167mm – high (including feet) 456mm – deep (including buttons and rear terminals)
Weight : 18.15Kg.
Pics from the net.